LDD example

Meanwell LDD series DC-DC Constant Current LED driver is designed to balance the current for a LED circuit and extend life time of the system. Here are some features of this range:

  • Wide input and output range
  • High efficiency up to 97%
  • Built-in PWM dimming and remote control function
  • Miniature size 22.6×9.9×8.9 mm
  • Various output options: 300mA, 350mA, 500mA, 600mA, 700mA, 1000mA
  • High reliability with 3 years warranty

Now let’s look at an example of a LED lighting system with LDD-300L implemented:

This application consists of:

Optional:

  • Fan
  • Temperature Sensor

This example uses LPV-100-36 as the main driving power supply and uses LDD series to lit and dim LED Lighting Circuits with PWM dimmer. Let’s look at this in details:

1. In each string of the circuit, LEDs are wired up in series which consists of 10 x 1W @350mA LEDs. So the total wattage is about 10W, and total forward voltage is about 30Vdc.

2. The output voltage of LDD-350L is 2~32Vdc. 30V is within the range. According to the spec, LDD must have input voltage greater than output. Therefore we need a supply greater than 30V. Given that the total wattage required for LEDs is 50W and we have other electronics in the circuit, we have chosen the 100W Meanwell LPV-100-36 (36Vdc output).

3. Five strings of LED lights are wired in parallel, thus each LDD-350L have input of 36Vdc and output of around 30V@350mA.

4. On the input side of LDD-350L, there is a DIM pin which is connected to the PWM dimmer for lighting control.

5. On the top left corner of above diagram, we have also incorporated a DC to DC converter (SD-25C-12) to convert 36Vdc down to 12Vdc to power PWM dimmer, fan and temperature sensor etc…

If you need assistance on LED circuit design, please contact us

 

Fill out my online form.


Print Friendly

Comments

  1. Pingback: How to dim LED Lights – Circuit & Examples | Wellforces - Resources

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>