Remote ON/OFF Switch and Remote Sensing Wiring

(1) Remote ON/OFF Switch: Using a TTL control signal connected to the +RC, -RC terminals of the S.P.S., we can control the output of the power supply. When +RC and -RC is short (0V), the S.P.S. will be ON; when it is open (the voltage between the two terminals > 4V), the S.P.S. is turned [...]

Read More

Remote Sense

Wires connected in parallel with power supply output cables such that the power supply can sense the actual voltage at the load to compensate for voltage drops in the output cables and/or isolation devices.

Read More